Info Screen	Prepare	Move axis	Move X		Move 10mm
							Move  1mm
							Move  0.1mm

					Move Y		Move 10mm
							Move  1mm
							Move  0.1mm
	
					Move Z		Move 10mm
							Move  1mm
							Move  0.1mm

					Extrtruder	Move 10mm
							Move  1mm
							Move  0.1mm

			Auto home

			Set home offsets

			Disable steppers

			Preheat PLA	Preheat PLA
					Preheat End
					Preheat Bed

			Preheat ABS	Preheat ABS
					Preheat End
					Preheat Bed

		Control	(Einstellungen, nur verändern, wenn Sie wissen, was Sie tun)
			Temperature	Nozzle:		0
					Bed:		0
					Fan speed:	0
					PreheatPLA conf	Fan speed:	255 	(=100% hexadezimal)
							Nozzle:		210
							Bed:		50
							Store settings		(nur wenn dauerhaft)
									
					PreheatABS conf	Fan speed:	255 	(=100% hexadezimal)
							Nozzle:		240
							Bed:		70
							Store settings		(nur wenn dauerhaft)

			Motion		Velocity	Vmax X:		 500 	(wenn zu hoch, verlieren die Motoren Schritte)
							Vmax Y:  	 500
							Vmax Z:		   5
							Vmax E:  	  25
							Vmin:   	   0
							VTrav min:    	   0

					Acceleration	Accel:		   500	(muss auf Jerk abgestimmt sein)
							A-retract:  	   500
							A-travel:	  1000
							Amax X:  	   500
							Amax Y:   	     5
							Amax Z:   	   100
							Amax E:   	  1000

					Jerk		Vx-jerk:  	    10	(Startgeschwindigkeit)
							Vy-jerk:  	    10
							Vz-jerk:  	  +000.4
							Ve-jerk:   	     5

					Steps/mm	Xsteps/mm:  	    80.00
							Ysteps/mm:  	    80.00
							Zsteps/mm: 	   400.00
							Esteps/mm:  	    93.00

			Filament	E in mm3: Off
			Store settings
			Load settings
			Iinitialize EEPROM	(Electrically Erasable and Programmable Read Only Memory)

		Print from TF		Refresh
					Printfiles.gcode
	
		Change TF card

		About Printer		1.1.6.2
					Extruder: 1
					Baud 115200